| I used staples at the top and bottom before face nailing two brads through each short rail of the front and back face frames. |
| Cut the vellum in half, and attach each piece to the body with brads. |
| All joints must be glued and the trim fastened with brads, preferably using pneumatic nailers, which leave very small fastener holes. |
| Attach plywood with panel adhesive and brads and sand it flush with front edge. |
| These were cut to a 3-inch outside measurement and attached from below with glue and brads. |
| His son, Daniel Bisbee, Jr., bought a mill on Second Brook where he made tacks and brads in partnership with Henry Soule. |
