The bad news is that we will need to be a little more careful to insure that the takedown screw remains tight when the rifle is in use. |
While the fit is superb I would prefer a gun you can push the takedown pin out on by hand. |
To field strip, make sure the pistol is unloaded, remove the magazine, decock and pull down on the takedown latch. |
It might feature a barrel of heavier contour, an upper receiver tang drilled and tapped for a tang sight as well as the takedown feature. |
Drilling for the takedown screw must be done with a milling machine, or at the minimum on a good drill press with a rigid quill. |
On the left side of the frame, just forward of the trigger, is the takedown lever. |