| Also, SolidWorks 2004 comes with predefined structural weldment members such as fillets, weld beads, gussets, end caps, and cut lists. |
|
| The weakest part of a weldment is the base metal affected by the heat of welding. |
|
| Following welding the weldment should be annealed and then heat treated to the desired strength level. |
|
| Using SMAW with e-type-swing torch moving, the distance of weldment diffusion is changed. |
|
| The Vickers microhardness measurement is also conducted to obtain the variation in hardness across weldment. |
|
| The door brackets and the locking pin were missing and the weldment areas for the brackets were rust covered. |
|
| The door stop, welded to the side of CN 46570 to restrict door swing, was missing and the weldment area was rust covered. |
|
| You can move the weldment body to elongate attached bodies and the guide sketch. |
|
| Build-up around struts, weldment joints etc. caused after the time cycle, generate additional false echoes. |
|
| In all types of welds, contamination by interstitial impurities such as oxygen and nitrogen must be minimized to maintain useful ductility in the weldment. |
|
| In order to determine weld quality of plug-welded dissimilar materials, the strength of weldment was also determined. |
|
| Discussion on weldment microstructure correlation with strength and hardness data concluded the paper. |
|
| You can now define a weldment group, a collection of related segments in a structural member. |
|
| The weldment must be stress relived or annealed after welding. |
|
| A ductile iron locking ring, positioned behind a retainer weldment on the spigot, is inserted over top of the lugged bell and rotated to provide restraint. |
|
| Instant3D now works on weldment parts for 2D and 3D weldments. |
|
| The recording mode provides the setting possibility of storing all weldment data in one single file or daily, weekly or monthly separate storing into a new file. |
|
| As shown from the rust in the weldment areas of the missing door components, the car movement record and information offered by railway employees, this car had posed a hazard over a wide geographic area for some time. |
|
| Each BOM can include different weldment cut lists. |
|
| The boiler body is produced as a weldment of 3-8 mm steel sheets. |
|
|
|
| Machining and production, weldment, maintenance and repairs, conception, assembly of machined parts and components for train doors, cutting and selling of steel. |
|
