With the reversible cutting arm positioner, the mason can put the saw as close to the wall or ground as possible. |
|
The company said it would also market one of its current electrode systems without a positioner. |
|
The feedback shaft at back of positioner should easily be turnable, thereby also moving the vanes of the limit indicator. |
|
At least the Democrats have a candidate smart enough to avoid playing into the public's just-forming impression of him as a straddler and positioner. |
|
In standard, the positioner is always configurated in position mode at power on. |
|
Both stations are equipped with a DKP 400 two-axis positioner in order to provide the required flexibility. |
|
The SIPART PS2 electropneumatic positioner is used to control the final control element of pneumatic linear or part-turn actuators. |
|
Adjustment of the valve with its positioner according to the initial surveys. |
|
This instruction must be used to store them definitively in the positioner. |
|
In this case, the address will be automatically saved in the positioner EEPROM and will be operational at the bus starting. |
|
The HART communication interface is used to transfer the data from the positioner needing replacement over to the substitute device. |
|
Please read this manual thoroughly in order to be able to operate the positioner effectively and obtain a long life time. |
|
This positioner holds the spoke at a slight angle, so that the shoulder of the tenon will have the correct angle to provide the dish of the wheel. |
|
The voice-controlled endoscope positioner is now coupled with the robotic arm system as well as the control centre for adapting the operating environment. |
|
A flexible test device positioner gives a range of phone angles from the starting touch position to 15 degrees or any position within a range of 30 degrees. |
|
For measurements of the z-profile of the capillary we used a piezo-driven objective positioner, which controls the distance between objective and the pressure cell. |
|
This new wrist positioner is remarkable because of its simplicity. |
|
When the positioner is energized to open, the seat deflates and the disc opens. |
|
The positioner and actuator section are a single unit, thus affording greater compactness and ease of use. |
|
The positioner can be transported by means of lifter and cables with an appropriate payload. |
|
|
For the multipole version of the positioner we will provide you with cable connectors as suitable accessories. |
|
For the positioner adjustment to other resolver types, or to another control logic, see Installation manual. |
|
The functionally designed, easy-to-use head positioner guarantees accurate patient positioning in all cephalometric projections. |
|
When the Kirschner wires are inserted correctly, remove aiming block, positioner and the anteversion Kirschner wire. |
|
Connections between signals from and to the positioner and from and to the safety PLC are to be executed by the integrator. |
|
The UP130's powerful design, together with Motoman's patented multiple robot controller, allows the robot to be used as a 6-axis part positioner to achieve unmatched flexibility. |
|
As a standard feature, the positioner comes with a binary input for DC voltage signals to signalize process information over the PROFIBUS-PA fieldbus. |
|
On the reduction unit support of the positioner modules there are holes for the lubricant replacement, located so that it is always possible to drain off and fill with lubricant according to the positioner assembly position. |
|
This function is of no importance to the operator of the positioner. |
|
The positioner is attached directly to the actuator. |
|
The positioner housing is constructed from durable die-cast aluminum and treated with a dichromate undercoat and polyester powder top coat for protection against the toughest applications in all process industries. |
|
The positioner can be ordered with or without optical position indicator. |
|
The entire system, consisting of robots, two-axis positioner, linear unit, laser and periphery, is controlled and coordinated by a single KUKA KR C2 controller. |
|
The positioner can be operated by means of switches and potentiometers. |
|
A high-speed beam galvanometer driver significantly reduces beam positioner move times for increased throughput. |
|
The installation of the light barrier and pushbutton panels is to be assessed according to the operator work station and the type, size and shape of the positioner. |
|
Contact positioner holds contacts correctly while crimping. |
|
We use locating pins and bushings to mount fixtures onto large frames that span between the positioner head-and tailstocks, so they are easy to just drop in, as needed. |
|