| Use a new pipet tip for each pipetting step and use aerosol barrier tips if not using positive displacement pipettors. |
|
| Prime the pipet tip 2-3 times in Lymphocyte Lysis Buffer before dispensing and rinse after addition to deionized or distilled water. |
|
| Just add the sample to the measuring cell from a pipet and start the analysis. |
|
| Depending on the expected chloride content, pipet 1.0... 5.0 mL bath sample into a glass beaker. |
|
| However, the Midi Plus should not be stored for a long period of time without removing the pipet. |
|
| In addition to the answers in the June 26 magazine, we also found: oasts, pipet, tepal, stere and porer. |
|
| Note: For Thermocyclers using oil, if sample has been taken from under the oil layer of the PCR tubes, the pipet tip should be wiped with a tissue after taking the sample from underneath the oil layer. |
|
| Using a pipet, apply 5 ml of the test fluid to the exposure area. |
|
| To be sure to make a sterile and performant analysis, use a paddle blender with a filter-bag: once the sample is blended, just pipet the filtrate, free of waste, behind the filter. |
|
| Gently pipet 15 µL of sample into the wells of the submerged gel. |
|
| Use a different pipet tip for each addition. |
|
| During the blending, the flora extracted from the sample flows through the filter, allowing you to easily and quickly pipet a filtrate from behind the filter with no residue. |
|
