Off to one side, an intact 12-pounder stern gun lies on one side, still fixed to its pintle. |
|
The gun pintle stands securely in the centre of the platform but there is no sign of the gun, either on the platform or on the seabed below. |
|
Looking closely, a much smaller gun rests on its pintle alongside. |
|
It consists simply of two wheels, an axletree with a pintle for attachment of the trail, plus a draught connector to which one or two swingletrees might be attached. |
|
Includes a standard scope and iron sights, can be mounted on a bipod, tripod, or a vehicle pintle. |
|
The internal armament of the helicopter comprises a pintle mounted 7.62 mm machine gun and a door gunner post for a 12.7mm general purpose machine gun. |
|
Measure the inside diameter of your equipment's pintle ring to find the right size for you then chose the appropriate lock. |
|
If the pintle eye coupler does not line up with the pintle hitch hook, adjust the position of the tow vehicle. |
|
The pintle hook lever must be able to operate freely and automatically snap into place into the latched position. |
|
Before coupling trailer, inspect the pintle hitch hook for wear, corrosion and cracks. |
|
Before each tow, check the locking device that secures the coupler to the pintle hook assembly. |
|
The gun itself has been salvaged, though the pintle remains. |
|
The rudder and pintle arrangement were significantly damaged and a thrust bearing became misaligned and distorted. |
|
Simple, effective and fully guarded mechanism to prevent theft or movement of equipment with pintle hitch hook-up. |
|
Be sure the pintle hook is securly tighten to the tow vehicle before coupling the trailer. |
|
Recommended for compressors, generators, portable electric road signs, farm or military equipment or anything else you have with a pintle hitch. |
|
The no-slack ram is to be incorporated in either the pintle hook or the pintle hook eye of the coupling apparatus. |
|
It was noted that the upper pintle weld of the flap was broken and a small crack approximately 210 mm in length was visible on the flap just below the second uppermost pintle. |
|
The latch mechanism fails to close securely on pintle or ball type hitch. |
|
The distance between the upper edge of the tiller and the bearing line of the upper pintle shall be not less than 85 mm, measured along the rudder head frontline. |
|
|
Also, the pintle hitch size must be the same as the pintle coupler size. |
|
You must provide a pintle hitch and pintle coupler for your tow vehicle, where the load rating of the pintle hitch and pintle coupler is equal to or greater than that of your trailer. |
|
The train had a searchlight mounted on a pintle on a flat car. |
|