| Briefly, if one collapse point is observed for a mixed film the surface phase rule determines lateral miscibility in the film. |
|
| The presence of two hydroxyl groups permits the formation of hydrogen with water, thereby favoring miscibility with the latter. |
|
| Exposure to air can drastically change not only miscibility transitions, but also surface pressures. |
|
| A practical limiting factor in forming more tightly crosslinked structures is the miscibility between the rose bengal amine and collagen. |
|
| In addition to the miscibility of the base oils, the compatibility of the thickeners must also be taken into consideration. |
|
| Arkema's AMSA enjoys wide use in the pharmaceutical industry due to its high acidity and high miscibility in aqueous and most organic media. |
|
| It has limited miscibility with halogenated hydrocarbons and is not miscible with aliphatic hydrocarbons. |
|
| Familiar examples are the miscibility of alcohol and water and the immiscibility of oil and water, which can be explained by intermolecular interactions. |
|
| Due to the low miscibility of water in low dielectric solvents, water and ions are mostly associated with the protein surface, acting as a molecular lubricant. |
|
| In the sodium-strontium system, there is a considerable degree of miscibility. |
|
| At high pressures, pairs of chemically dissimilar gases may very well exhibit only limited miscibility. |
|
| Many pairs of liquids, however, are only partially miscible in one another, the degree of miscibility often depending strongly on temperature. |
|
| If hydraulic fluids of different chemical-physical characteristics are used, we advise to ask the oil producer or distributor to hand out a certificate of the miscibility. |
|
| Clear anhydrous oils are examples of formulations that require complete miscibility of all ingredients. |
|
| Generally, polymer miscibility does not follow miscibility criteria of small molecules. |
|
| The result from equation 1 represents the ideal case of assuming complete miscibility. |
|
| The mechanical mixtures have total or partial miscibility gap in solid state. |
|
| It was found that cardanol can dramatically improve the miscibility of CPSA with epoxy resins. |
|
| At 127° C, the upper consolute temperature, complete miscibility is attained: above 127° C the two liquids mix in all proportions, but below 127° C they show a miscibility gap. |
|
| The correct choice of anion is very important because this influences the miscibility with water and other solvents, viscosity, as well as thermal and electrochemical oxidative stability. |
|
|
|
| A negative Huggins interaction parameter and excellent miscibility are expected because that MMA-MAAM copolymer is a Lewis base while MMA-MAA copolymer is a Lewis acid. |
|
