| This gave us 215 mils of waterproofing protection on all of the vertical walls. |
|
| The output pinion of the traverse gearbox meshes with the gear rack segment attached to the carriage body, providing 800 mils of traverse. |
|
| The average thickness of FPO in Europe is about 60 mils, and no product sold there is less than 48 mils. |
|
| Tape thickness is approximately 1.5 mils and tape path component tolerances are in the 0.0004-inch range. |
|
| Research has indicated that the optimum thickness for the total paint coat is 4-5 mils or about the thickness of a sheet of newspaper. |
|
| Third, layout engineers also need to ensure trace lengths between lanes match to within 15 mils. |
|
| Rousos adds that a buildup of 40 to 60 mils is very important. |
|
| One coat of some paints will measure between 10 and 14 mils, says Rafie. |
|
| Many have observed the benefit of using materials with a minimum thickness of 15 mils when ready-mix trucks or laser screeds drive directly on the vapor retarder. |
|
| Conventional spray and dip coatings go on in microns and mils. |
|
| Some sheet metal, particularly that used in the manufacture of steel studs and other steel-framing members, may also be referred to by its thickness in mils. |
|
| The drops have to be small enough to hang in the air instead of immediately falling to the slab surface, which puts them in the range of about 5 mils or smaller. |
|
| Cyprus decimalised the Cypriot pound in 1955, which comprised 1,000 mils, later replaced by 100 cents. |
|
| Often we can get away with using FR-4 stiffeners as thin as 10 mils. |
|
| To survive in the Mils and hollows of western North Carolina, a farmer had to know how to grow burley tobacco. |
|
| One is calibrated in Mils and the other is a telemetrical scale calibrated to range an 18 inch target from 200 to 800 meters. |
|
| Our most recent partnership with MILS demonstrates our continued commitment to providing the best services for our customers. |
|
