The bandsaw, which was used to cut large pieces of meat and bone, was situated in the shop's main walkway, where people regularly passed by. |
|
When the company introduced the bandsaw is still a mystery, but there are no ship saws listed in their 1888 catalog. |
|
Need to cut a length of tube steel out in the scrap pile, but don't want to dig the steel out and haul it to a shop bandsaw? |
|
Her father was a bandsaw operator, and her mother looked after Mrs Austin and her two sisters. |
|
The firm has also recently taken delivery of a new 60 ins bandsaw which can handle most large logs, and serves other woodworkers in the area. |
|
At the heart of most shops, you can find a heavy-duty table saw or bandsaw, a thickness planer, and a jointer. |
|
The legs were rough cut with a bandsaw and spokeshaved to final curve, lots of fun getting them all the same. |
|
This is the sort of pattern one might expect from a bandsaw, with the slant resulting from the forward feed of the block. |
|
This shaft powered a bandsaw, a lawn mower sharpener, an emery wheel grinder, a disc sharpener, a forge blower, and a trip hammer. |
|
The wood, costing £120-plus per bow, is planked and shaped carefully into blanks on a fine-toothed bandsaw. |
|
Portions could be sawn off large fish or off blocks, but this might be difficult in the case of thick material unless a bandsaw is available. |
|
On the other hand, all veneers are put down in a press, moldings worked on the spindle molder, and shapes cut on the bandsaw or jigsaw. |
|
The support arms can be bent if the bandsaw blade does not lie against both the supports. |
|
Read this manual carefully and make sure you understand it before attempting to use the bandsaw blade grinder. |
|
The wire kit is also compatible with the chip duct of the bandsaw and with the trailer kit. |
|
If the cracks are so large that they cannot be ground away, the bandsaw blade should be discarded. |
|
Between bouts of running a portable bandsaw mill and helping local people and businesses with computer problems, he tries to find time to play the violin and cello. |
|
The professionals often speed the process up with a bandsaw, but these have a tendency to waste a lot of bowstaves until you know what you're doing. |
|
The iMac keyboard is pretty sturdy and if you are careful you can actually lop almost a quarter inch off each end with a bandsaw, without cutting anything crucial. |
|
And unless you happen to own a bandsaw, so is slicing off the chine bone, part of the backbone that's attached to the ribs. |
|
|
Same plume, same huge grey-black back breaking the surface, turning like a slow, dull bandsaw. |
|
If you want to precision saw or precision mould, which you normally do when moulding knives are mounted in the cutter head, there are special log posts for the bandsaw. |
|
This mobile log bandsaw, which tips the scales at 13 metric tons, can easily saw logs with diameters up to 1.5 metres and lengths up to 13 metres into boards, squared timbers, planks and slats. |
|
The vertical bandsaw blade is an endless narrow metal strip, with teeth along one edge, that runs around two large motorized pulleys or wheels that are mounted on a frame so that one is directly above the other. |
|
In addition to new and established products in the thin-cutting frame saw and band saw sector, there was also a presentation of two bandsaw blades with patents pending. |
|
Fold up the grinding motor and remove the bandsaw blade. |
|
The support arms also secure the bandsaw blade while grinding. |
|
For instance, you can start with an electricity-powered, stationary bandsaw mill, and later rebuild it to a petrol-powered bandsaw mill with a trailer kit. |
|
Wear protective gloves whenever you handle the bandsaw blade! |
|
The bandsaw blade can be ground to a minimum width of 24 mm. |
|
If the bandsaw blade is very worn, grind several times. |
|
He was trying to feed wood through the bandsaw when his arm was drawn into the high-speed blade and cut lengthways up to his elbow. |
|
The thieves got inside a garage and stole items including a bandsaw and grinder. |
|
Bar, tube, profile and plate from mid-size up to 500 mm across were previously cut using an ageing bandsaw on which the blade tended to wander, producing a wavy cut surface. |
|
The firm has invested more than pounds 60,000 in new equipment, including a pounds 13,000 wide-belt sander and a re-saw bandsaw that can be used to cut huge pieces of wood. |
|
Standalone Machines featured Skinners, Portioners, Deli Slicer, Bandsaw, Marination Tumbler, Meat Harvesters, Flattener, Checkweigher and Scales. |
|