The setscrew is manufactured in casehardened steel and is coated to protect against corrosion. |
If you have the type that slips over a copper nipple, use a hex key to loosen the setscrew on the underside to twist-pull the spout off. |
The sleeves slide onto the roller frame and lock into place with a setscrew. |
The hubs must be axially secured on the shaft by means of a setscrew, an end plate or a sufficient interference. |
After noting the probe position in the bushing, slowly loosen the setscrew on the bushing and slide the probe out. |
Loosen the setscrew just until the probe slides out of the bushing or the setscrew may fall out. |