In twenty-five years of collecting, the author has not seen another stick and rabbet plane for early wide sash bars. |
|
This can be tolerated in rough work or easily corrected with a second pass of the rabbet plane on its side. |
|
The silver lace trim needed to line the underside of the rabbet so that the scalloped edge would peak out onto the backing board. |
|
The part of the sole in front of the rabbet mouth was neatly clad with tinplate. |
|
It is possible, of course, to cut this rabbet with a conventional fillister. |
|
Check the plans for the specified depth and thickness of all your dado and rabbet cuts. |
|
The Joint 5X5 AS is equipped with a pneumatic brake and a horizontal clamp which comes in from the front of the machine to stabilize the rabbet. |
|
A neater and stronger solution was to rabbet the drawer sides to accept both the drawer bottom and the runners. |
|
The depth of the rabbet is determined by the depth of the cut and the number of passes made along the work surface. |
|
Tatum rabbet planes are scarce to rare and this was a nice example. |
|
The planer comes with an adjustable edge guide for precision edge planing and rabbet cutting. |
|
The difficult operation of sticking uniform sash bars was greatly simplified by these planes, which allowed both the sash molding and rabbet to be planed from one face. |
|
The double rabbet with two seal faces and doublelayer door leaf provides good noise protection. |
|
Among the more sophisticated planes were two sets of cornice planes, a set of sash planes, three door planes, two side rabbet planes, and a cut and thrust. |
|
The width of the rabbet cut may be adjusted by moving the edge guide. |
|
The slaughtered party consists of a step and a door with its rabbet. |
|
Hinges in rabbet up to 100 kg or 120 kg with face-fixed pin hinges. |
|
Tighten the clamp bolt and mark the position of the object on the rabbet. |
|
Width and height: The measurements must be the rabbet width and height. |
|
The edge guide may be attached for planing edges and making rabbet cuts. |
|
|
Adjust the edge guide to the desired width for the rabbet cut. |
|
The rabbet for the comparatively horizontal horn timber is taken from the sections in the body plan. |
|
I would fain see him walk in querpo, like a cased rabbet, without his holy furr upon his back, that the world may once behold the inside of a fryar. |
|