This means that if the gate is in the horizontal position, the gate torque is at its maximum and the displacer at its minimum. |
|
The next stage in this adjudication is to determine why the displacer was not designed larger. |
|
A stainless steel displacer is required if the control is to actuate in liquid as well as by the barrier. |
|
In case of liquid turbulence, it is recommended that the displacer is isolated with a damping chamber to prevent oscillations. |
|
In this sequence N°1pump starts as the level rises to the middle displacer. |
|
Each displacer is marked with the TAG No. or, if not known, with the last three digits of serial number of the respective transmitter. |
|
On the other hand, the maximum possible diameter of the displacer must be taken into consideration. |
|
Several models are available for some of the major torque tube displacer transmitter manufacturers. |
|
Below table helps to define the GWR probe length based upon the length of the most common displacer transmitters. |
|
Common foamboard, used for signs and posters, makes a good displacer. |
|
The heat transfer fluid is helium at 10 bar and flow is controlled by a displacer. |
|
Wind isn't just the cruel displacer of garden furniture and comically oversized hats, it's also responsible for the kind of event that makes men like Richard Hammond weak at the knees with infantile excitement. |
|
Both pumps operate until the level is dropped to the lower displacer. |
|
Insert displacer in displacer chamber or vessel. |
|
If the level continues to rise, the upper displacer actuates the alarm switch which remains actuated until the level drops to the middle displacer. |
|
The displacer is fully immersed for density and interface level detection. |
|
There are several types of thermo rolls and the most common are centre bore rolls, displacer type rolls, and peripherally drilled rolls. |
|
Ultrasonic, capacitance, pressure, conductance, float and displacer, and sounding reel types. |
|
The Beta and Gamma type Stirling engines use a displacer piston to move the working gas back and forth between hot and cold heat exchangers in the same cylinder. |
|