The resistance to demagnetisation in an external magnetic field is also relatively low. |
|
Samarium cobalt magnets have a high resistance to demagnetisation and are resistant to high temperatures. |
|
Secolit gripper magnets are especially suitable for direct use in spot-welding machines, as no demagnetisation occurs. |
|
Excessive torques may lead to demagnetisation or a breakage of the motor shaft. |
|
Magnetisation and demagnetisation of magnets and magnet systems is performed in-house. |
|
Keep your card away from coins and other chip cards, to prevent demagnetisation. |
|
The drive cannot receive another run command during the time programmed in 06.63, the motor demagnetisation time. |
|
Figure 1: demagnetisation curve of isotropic and anisotropic magnetic material. |
|
Parts need to be demagnetized down to the right level, using a demagnetisation unit or any other relevant method. |
|
Usually winding and magnet temperature must be kept below 120C and then there are issues of demagnetisation and mechanical strength. |
|
Excessive torques lead to a break of the motor shaft or demagnetisation. |
|
They are more resistant to demagnetisation than the Alnico materials which make them suitable for use in complex shaped magnets. |
|
The cryogenics system is based on a small mechanical cooler with a further adiabatic demagnetisation stage and will work with cryogenic detectors at sub-Kelvin temperatures. |
|