The crankcase jacket, bedplate and cylinder head cover are all made from magnesium, which weighs 30 percent less than aluminium. |
|
The upper case is lowered onto the bedplate, and a liquid sealing compound is injected into a groove in the contact surface. |
|
Use only the lifting points on the bedplate as identified on the assembly drawing to lift the bedplate assembly. |
|
Caution: Lock mounting bedplate and dial ring mounting surfaces must be parallel. |
|
The method of attachment of the assembly to the bedplate must not of itself modify the strength of the assembly. |
|
The equipment can be supplied with a bedplate on wheels or an incorporated COMPACT-20 folding table. |
|
The height of the drain bedplate can be adjusted according to the thickness of the screed or surface finish. |
|
Multiple applications: Hoist, quick bedplate for little knocks or for more important repair work assemble all the necessary equipment. |
|
The main energy is provided by 2 resistor layers placed under the vault and the bedplate. |
|
Material, equipment and tie-down means adequate to ensure that the tractor is firmly fixed to the bedplate, independently of tyres. |
|
When the unit is to be installed on the ground, provide for a concrete bedplate which shall assure a uniform distribution of the weights. |
|
Note: Units on baseplates should if possible be mounted on the same bedplate as the prime mover. |
|
A lever linkage lifts the engine bedplate in order to tension the belt. |
|
A cabinet with all the index cards and a CD-Rom with a computer program that allows you to print them or add to them, etc. is supplied with the bedplate. |
|
With the new system we have an all-in-one bedplate and hoist for any use. |
|
The line of matrices, held by the composing stick, is placed against two set squares fastened to the bedplate of the machine and manually pushed on a slide rest, which takes it to the elevator. |
|
Large, stationary power-plant engines and marine engines are built up from a foundation, or bedplate, and have upper and lower crankcases that are separate from the cylinder assemblies. |
|
This consists of a bedplate of welded steel which supports the bearing holders for the vertical axis in the centre, while the grinding chamber and screens are fixed to the edges. |
|
The investment concerns mainly three production lines, for cylinder heads, crankshafts and crank cases, including bedplate, as well as an assembly line. |
|
The bedplate knife is easily replaced by loosening 4 bolts. |
|
|
Nine separate components such as oilpan, bedplate and timing chain cover have been integrated into two major castings, made possible by a novel vertical split line. |
|
Consist of a support bedplate, the inertia wheel and the motor reducer. |
|
The assembly shall be secured to the bedplate so that the members connecting the assembly and the bedplate do not deflect significantly in relation to the protection structure under loading. |
|
Some time ago a hoist was needed in order to work with a bedplate. |
|
When the gearless is placed in the basement and strenght of the ropes on the traction sheave is upward it has to be fixed on the bedplate with two additive nuts M 20 placed on position B left and right side of the machine. |
|
The settings for the vault and the bedplate are independent. |
|